Introduction:
Grid ball mill is designed and reasonable manufactured and has more functions and advantages. During production process, its production capacity is quite large and can create higher interest value for customers, which is popular grinding equipment.
Product Gallery
Working principle:
The holes on the grid lining plate are arranged obliquely, and the width of the holes gradually expands to the discharging end, which can prevent pulp backflow and coarse particle blockage. The slurry flows into the fan chamber through the pores in the grid lining plate at the discharge end, and then turns to the upper part of the tube and exits along the pore passage. The hollow shaft neck is inlaid with wear resistant inner sleeve and one end is made into bell-shaped blade so as to guide the pulp to flow out of the mill. Due to the pulp is discharged through the grid plate, so we call it the grid ball mill.
Installation and testing
1, Levelness shall be cared when installing the grid ball mill, the equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2, Making sure the equipment body in vertical position with the foundation levelness.
3, Checking whether the bolts are loose or not, tighten them if necessary.
4. Power cable and control switch are configured according to the power of the equipment.
5. In the last step, empty load test will be carried out after the inspection. Production can be carried out after the test runs normally.
Technical Parameters
SpecificationShell DiameterShell LengthVolumeRotary SpeedGrinding Medium LoadTransmission TypeMotorProfile Dimensions
(L脳W脳H)Total WeightRemarks
PowerRotary Speed
mmmmM3r/mintkwr/minmt
MQS15脳3015003000526.69Side-edge Transmission957426.4脳2.9脳2.618.Drum Feeder
MQS15脳15150015002.329.24.8607255.7脳3.2脳2.813.7
MQS15脳24150024003.729.27.6907306.9脳3.3脳2.816.5
MQS15脳30150030004.626.610907427.6脳3.4脳2.819.5Rubber Liners
MQS21脳30210030009.422.1202207408.5脳4.65脳3.045
MQS24脳302400300012.221252509808.8脳4.7脳4.455
MQS24脳702400700026.6621544757408.8脳4.7脳4.467Rubber Liners
MQS27脳212700210010.619.72228073314.3脳5.8脳4.869
MQS27脳362700360018.520.539400187.512脳5.8脳4.774
MQS27脳402700400020.520.2438400187.512.4脳5.8脳4.777
MQS27脳602700600034.419.55363058912脳5.7脳4.584
MQS29脳41290041002619.34424507409.9脳6.1脳5.176.1
MQS31脳643100640043.718.356
100016715.2脳6.98脳5.8141
MQS32脳313200310022.6518.346.9
50016713.9脳7.3脳6.0109
MQS32脳363200360026.318.354
63016714.3脳7.3脳6.0116.94
MQS32脳403200400029.318.260
71098014.7脳7.3脳6.0121.4
MQS32脳453200450032.918.368.5
80016715.2脳7.3脳5.9126.23
MQS32脳543200540039.418.381.6
100016716.6脳7.3脳6.1135.4
MQS36脳453600450041.417.2586
100016713.5脳7.3脳6.3153.1
MQS36脳60360060005417.3112
140016715.5脳8.3脳6.3190.6
MQS36脳85360085007917.4144
180074320脳8.2脳7.1260.89
MQS40脳604000600069.816.0126
150020017.4脳9.34脳7.5215.5
MQS40脳67400067007616.0155
160098016脳8.43脳7.5235.2
MQS40脳13540001350015716.5280
330098024.2脳9.9脳7.8284/375Rubber LinersBall Mill manufacturer
website:www.millkiln.com/ball-mill/